75mm Lath Fire Roller Shutter 

  • Cost effective fire door protection
  • Self coiling or motorised
  • Suitable for wiring into smoke/fire alarm systems
  • Tested to BS476 part 22
  • All electrical doors C.E. marked with certification
  • Hard wearing
  • Made from the finest materials 

2 Hour and 4 Hour Rated available

All our fire doors are tested to BS476 part 22.
Curtains constructed from 75mm curved steel scroll laths – standard finish galvanised.

Self coiling

The door is designed to stay in the open position and close in the event of fire. After a fire the closing of the door is via drop bar weight located in captive guides. Maximum size 2500mm wide x 2500mm high – frequent use is not recommended.

Chain Operated

Again the door is designed to stay in the open position. The closing of the door is via a drop bar weight located in the captive guides. Maximum size is 4000mm wide x 3000mm high – frequent use is not recommended.

Electrically operated

These doors are controlled by a controlled descent motor. On activation the rate of descent is controlled by the gearbox being constantly engaged exerting a manual breaking effect on the curtain. The rate of descent is approximately 100mm per second. The clutch can be reset at a high level and the door can be raised and lowered in the normal fashion. The motor also has a facility to stimulate a fire test by a pull and rest cord. Maximum certified size 7000mm x 7000mm Electrical operation is normally with standard 3 push button control. Available single or 3 phase.

Optional Extras

Powder coated finish to std RAL or BS colours. Resettable solenoid for wiring to fire/smoke alarms by others. A 24volt supply will be required. Key switch control Audio Visual displays are all available.

[edit]